Call us: 408.627-7008
Email us: sales@showcasemodels.com


Shopping Cart
Your basket is empty
A Product Has Been Added to Your Basket Close
{SmallPicturePath}
{ProductName}
{ProductCode}
{Quantity}
{PreOrderText}
Continue Shopping   Checkout

Bell X-1A USAF Desktop Model Plane

SKU: CX1AT
The Bell X-1, originally designated XS-1, was a joint NACA-U.S. Army Air Forces/US Air Force supersonic research project and the first aircraft to exceed the speed of sound in controlled, level flight is now made available on a desktop model by Mastercraft.
Our Price:
$169.95

Regular Price:
Out of Stock
 
Reviews (0)
Questions
 

Product Description

Scale : 1/32
Wing Span : 10.5"
Length : 13.25"
Code : CX1AT

The X-1 was in principle a "bullet with wings" that closely resembled the shape of the Browning .50-caliber (12.7 mm) machine gun bullet that was known to be stable in supersonic flight.[2] The pattern shape was followed to the point of seating the pilot behind a sloped, framed window inside a confined cockpit in the nose. After the aircraft ran into compressibility problems in 1947, it was modified to feature a variable-incidence tailplane. An all-moving tail was developed by the British for the Miles M.52, and first saw actual transonic flight on the Bell X-1 that allowed it to pass through the sound barrier safely. The rocket propulsion system was a four-chamber engine built by Reaction Motors, Inc., one of the first companies to build liquid-propellant rocket engines in America. It burned ethyl alcohol diluted with water and liquid oxygen. The thrust could be changed in 1500 lbf increments by firing one or more of the chambers. The fuel and oxygen tanks for the first two X-1 engines were pressurized with nitrogen and the rest with steam-driven turbopumps. The all-important fuel turbopumps, necessary to raise the chamber pressure and thrust, while lightening the engine, were built by Robert Goddard who was under Navy contract to provide jet-assisted takeoff rockets.

The X-1A was intended to investigate aerodynamic phenomena at speeds above Mach 2 (681 m/s, 2,451 km/h) and altitudes greater than 90,000 ft (27 km), specifically focusing on dynamic stability and air loads. Longer and heavier than the original X-1, with a bubble canopy for better vision, the X-1A was powered by the same Reaction Motors XLR-11 rocket engine. The aircraft first flew, unpowered, on 14 February 1953 at Edwards AFB, with the first powered flight on 21 February. Both flights were piloted by Bell test pilot Jean Ziegler. After NACA started its high-speed testing with the Douglas Skyrocket, culminating in Scott Crossfield achieving Mach 2.005 on 20 November 1953, the Air Force started a series of tests with the X-1A, which the test pilot of the series, Chuck Yeager. These culminated on 12 December 1953, when Yeager achieved an altitude of 74,700 feet (22,770 m) and a new air speed record of Mach 2.44 (equal to 1620 mph, 724.5 m/s, 2608 km/h at that altitude). Unlike Crossfield in the Skyrocket, Yeager achieved that in level flight. Shortly after, the aircraft spun out of control, due to the then not yet understood phenomenon of inertia coupling. The X-1 dropped from maximum altitude to 25,000 feet (7,620 m), exposing the pilot to accelerations of up to 8g, during which Yeager broke the canopy with his helmet before regaining control.
 


Home | About Us | Links | Contact Us | Our Partners

©ShowcaseModels.com - Quality desktop wood models, wood model planes, wood model ships, wood model helicopters

Shopping Cart Software by Ashop Commerce